SAE AMS4169 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieve
作者:标准资料网 时间:2024-04-29 00:15:46 浏览:9191
来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS4169
Title:Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Rationale: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Title:Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
Issuing Committee:Ams D Nonferrous Alloys Committee
Scope: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Rationale: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
下载地址: 点击此处下载
