GB/T 3389.5-1995 压电陶瓷材料性能测试方法 圆片厚度伸缩振动模式
作者:标准资料网 时间:2024-05-10 08:03:42 浏览:9034
来源:标准资料网
基本信息
标准名称: | 压电陶瓷材料性能测试方法 圆片厚度伸缩振动模式 |
英文名称: | Test methods for the properties of piezoelectric ceramics—Thickness extension vibration mode for disk |
中标分类: |
电子元器件与信息技术 >>
电子设备专用材料、零件、结构件 >>
电子技术专用材料 |
ICS分类: |
|
替代情况: | 替代GB 3389.5-1982;被GB/T 3389-2008代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1995-07-24 |
实施日期: | 1996-04-01 |
首发日期: | 1982-12-30 |
作废日期: | 2009-02-01 |
主管部门: | 中国船舶工业集团公司 |
提出单位: | 中华人民共和国电子工业部 |
归口单位: | 全国海洋船标准化技术委员会 |
起草单位: | 科学院武汉物理所 |
起草人: | 王四德、王玉海 |
出版社: | 中国标准出版社 |
出版日期: | 1996-04-01 |
页数: | 平装16开, 页数:29, 字数:53千字 |
适用范围
本标准规定了压电陶瓷圆片厚度伸缩振动模式材料性能测试方法。本标准适用于机械品质因数Qm大于50的压电陶瓷圆片厚度伸缩振动模式材料性能的测试。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 电子元器件与信息技术 电子设备专用材料 零件 结构件 电子技术专用材料
Product Code:SAE J2275
Title:Internal Combustion Engines - Piston Ring-Grooves
Issuing Committee:Piston And Ring Standards Committee
Scope: This SAE standard identifies and defines the most commonly used terms for piston ring-goove charactersitics, specifies dimensioning for groove widths, and demonstrates the methodology for calculation of piston groove root diameter. The requirements of this document apply to pistons and rings of reciprocating internal combustione ngines and compressors working under analogous conditions, up to and including 200 mm diameter and 4.5 mm width for compression rings and 8.0 mm width for oil rings. The specifications in this document assume that components are measured at an ambient temperature of 20 degrees C (68 degrees F). Tolerances specified in this document represent a six sigma quality level.【英文标准名称】:StandardSpecificationforRigidPoly(VinylChloride)(PVC)ExteriorProfilesUsedforFencingandRailing
【原文标准名称】:护栏和扶手用硬质聚氯乙烯(PVC)外型的标准规范
【标准号】:ASTMF964-2008
【标准状态】:现行
【国别】:美国
【发布日期】:2008
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:栏栅;护栏;聚氯乙烯
【英文主题词】:Fences;Fencing;Polyvinylchloride
【摘要】:
【中国标准分类号】:Q74
【国际标准分类号】:83_140_99
【页数】:5P;A4
【正文语种】:英语